meshing

Once you get a decent low density point cloud, you are ready to move on to denser point cloud and the meshing steps.

一旦你得到一个体面的低密度点云，你是准备进入更为密集的点云和啮合步骤。

Once your point cloud is free of obvious noise, you are ready to run the Meshing steps to triangulate it.

一旦你的点云是显而易见的，无噪音，你就可以运行它三角啮合步骤。

Repeat the process for the rest of your noise points and then move on to the Meshing steps, described in the section below.

重复该过程为您的噪声点休息，然后移动到啮合的步骤，在下面一节中描述。

It should be said GALLUS machine meshing gear teeth, there was a small staves of opportunities.

不该说GALLUS的机械是歪齿轮啮合的，呈现齿杠的时机小。

The meshing contact-impact and contact performance of spiral bevel gears has a strong impact on the whole machine performance.

螺旋锥齿轮的啮合接触冲击特性和动态接触性能的好坏严重影响其整机的工作性能。

Conjugate conditions equations are established on the basis of conjugate conditions of two curved surface and meshing theory of gears.

根据两曲面的共轭条件和齿轮啮合原理得到齿轮共轭的共轭条件方程；

With a two-stage gear system with time-variant meshing stiffness taken into consideration, the paper established its dynamic equation.

在考虑二级齿轮传动系统时变啮合刚度的情况下，建立了其动力学方程，它是一个具有周期性时变系数的线性动力学系统。

Checking the transmission chain rotation is normal or not, ensure its without extrusion, Chain and sprocket meshing good.

检查传输链条转动是否正常，保证其无挤压、受卡现象，链条与各链轮啮合良好。

Toothed ball meshing, compact structure, rational design, achieving the mechanical transmission precision requirements.

球齿式啮合，结构紧凑，设计合理，达到机械传动精度的要求。

The meshing of her public and private lives placed near schizoid demands on Thatcher.

她的公共和私人生活的不同要求简直会让人神经分裂。

It is proved that the main source of the noise was the meshing vibration of reverse gears in gearbox.

综合分析了实测信号及其数据处理结果，得出此型号拖拉机发生异常噪声的主要原因是其变速箱倒档齿轮的啮合振动所致。

A well solved DSM looks like this: If your point cloud has noise points you may want to remove the noise points before meshing.

一个很好的解决用电看起来像这样：如果您有噪声点云点您可能需要删除之前的噪声点啮合。

Rotational speeds, meshing forces, and meshing frequencies of the gears are obtained by dynamic simulation of the virtual prototype.

对虚拟样机模型进行动力学仿真，得到各级转速、齿轮啮合力及啮合频率。

On the premise of considering boundary condition, meshing performance of the single-enveloping of TI worm gearing is carefully studied.

在考虑边界条件的前提下，深入分析了一次包络TI蜗杆传动的啮合性能。

An involute gear may be defined by its meshing with a rack with straight-lined flanks.

一种渐开线齿轮可界定其与齿条啮合与直排两翼。图。

One troublesome task involves meshing the mundane but incredibly complex machinations of accurately billing cell phone subscribers.

其中一个看似简单但其实复杂的任务就是如何对手机用户准确收费。

This design method is easily performed. Furthermore, only involving the plane meshing theory, the result is clear and is easily tested.

这种设计方法简单可行，只涉及到平面啮合理论，结果直观，便于检验。

Holes in parallel between the degree of error will affect the quality of the meshing gears.

孔系之间的平行度误差，会影响齿轮的啮合质量。

Because when the frequency of close to the meshing of gears susceptible to the natural resonance frequency.

因为当啮合频率接近于齿轮系的固有频率时容易发生共振。

Gear meshing process as a contact, because involves contact state changes a complex nonlinear problems.

因涉及接触状态的改变而成为一个复杂的非线性问题。