steels

The persistent slip bands were determined by the observations of the substructure near the surface of gear steels on fatigue load.

通过对在疲劳载荷作用下渗碳齿轮钢次表层亚结构的观察发现有持续滑移带形成。

She can play with her friends, steels the oranges in the garden, and communicates with the little animals.

她可以与自己的朋友一起玩耍，偷摘果园的橘子，和小动物们打交道。

Low-carbon steel is often used as constructional steel, and low-carbon and medium-carbon steels are often used as machinery steel.

低碳钢常用作建筑用钢，机械用钢一般是低碳钢和中碳钢。

If we focus only on the materials normally known as steels, a simplified diagram is often used.

如果只把注意力集中于一般所说的钢上，经常要用到简化铁碳状态图。

In modern steels they shouldn't break at all, but if they do it will be where the steel is thin and most easily bent, near the point.

现代钢做的刀很难断掉，如果断了，肯定是最薄最容易弯曲的地方，靠近刀尖。

HIGH STRENGTH STEELS FOR CIVIL ENGINEERING WORKS. ASSESSMENT OF THE EMBRITTLING EFFECT OF A MEDIUM BY MEANS OF SLOW TENSILE TESTING.

建筑工程用高强度钢.在缓张力试验条件下对介质脆化效应的评定

Since the carbon content of these steels is so high, parts made from high carbon steel are normally difficult to machine and weld.

由于碳在这类钢中的含量很高，用高碳钢制作的零件通常很难被加工和焊接。

The following discussion applies principally to the heat treatment of ordinary commercial steels known as plain carbon steels.

下列讨论主要针对被称为普通碳钢的工业用钢而言。

The electric arc furnace is better for the production of special steels than any other types of furnace, since it needs no fuel.

电弧炉用来生产特殊钢比用任何其他炉子都好，因为它不需要燃料。

Determination of the yield strength of nuclear reactor pressure vessel steels by means of amplitude-dependent internal friction.

通过随振幅变化而变化的内磨擦测定核反应堆压力容器钢屈服强度…[中国核科技信息与经济研究院]。

Microstructural evolution in medium copper low alloy steels irradiated in a pressurized water reactor and a material test reactor.

在压水堆和材料试验堆中辐照的中铜低合金钢的微结构演变…[中国核科技信息与经济研究院]。

Alloy steels are not normally used for most tools due to their increased cost, but for some have found favor for special applications.

合金钢在大部分工具上通常不使用，由于它会增加成本，除了一些特殊应用的已知优点。

Although the corrosion resistance of stainless steels is better than those of other metals, it could corrode under some specific conditions.

虽然有优于其它钢材的抗蚀性，但是仍会受到某些因素的影响而发生腐蚀。

Tempering by grinding heat causes hardness change at the surface of the hardened steels .

磨削热导致回火引起淬硬钢磨削后表面硬度变化。

This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.

本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。

STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.

混凝土用钢材。用于增强钢制备的可焊接金属线。

Hot-dipped extra and ultra - strength galvanized steels have been widely used in automobile bodies for protecting them from being corroded.

热浸镀锌层是汽车车身用高强度镀锌钢板具有良好的耐蚀性能的保证。

The bar steels adopt I steels, angle steels or channel steels, or adopt steel plates which are welded into a cross shaped section.

型钢选用工字钢、角钢或槽钢，或者采用钢板焊接为“十”字型截面。

The environmental protection sculpture made of discarded steels of the Expo pavilions.

以上海世博会建设场馆废钢材为原料的环保雕塑。

Stainless steels have been widely used in various fields due to their good corrosion resistance and mechanical properties.

由于不锈钢良好的耐蚀性及机械性，而被广泛的应用。