spline

The genetic algorithm is usually selected as an optimization tool for the least square fitting about ordered plane data by B-spline curves.

在B样条曲线的最小二乘拟合平面有序数据问题中，经常采用遗传算法进行优化。

The word "spline" once referred to a piece of flexible wood, rubber, or metal used to draw curves on a piece of paper .

单词曲尺曾经指的是惯于在一张纸上绘制曲线的一片柔软的木头，橡胶或金属。

This method through the point's density distribution on the die profile could control fitting error of the curvature of the arc spline.

该方法可通过拉弯件轮廓曲线上布点的密度来控制模具轮廓曲线上曲率分段的多少和误差大小。

An analysis on the cold extrusion process and a technological experiment were made for the two spline ends of a slim drive shaft .

细长传动轴两端花键头进行了冷挤压加工分析与工艺实验。

You'd then anchor a spline to the points and use a pencil to draw the curve along the spline as it bent around the points.

然后你将曲尺锚定在这些点上并用铅笔沿着曲尺绕着这些点的方向绘制这条曲线。

A designer would place the spline on a piece of paper and anchor it to a given set of points .

设计者把样条放置在一张纸上并锚定到一组给定的点上。

The surface of the paddle blade is non-uniform rational B-spline surface, the surface has met precision requirements for paddle blade.

桨叶曲面为非均匀有理B-样条曲面，达到了桨叶曲面的精度要求。

The spline is specified by an array of points and a tension parameter.

样条由点的数组和张力参数指定。

Fills the interior of a closed cardinal spline curve defined by an array of.

结构数组定义的闭合基数样条曲线的内部。

By numerical simulation of a six-tooth rectangle spline, the optimized half-angle of the concave die can be got.

结合六齿矩形花键轴实际成形情况进行模拟计算，获得了入模半锥角的较佳取值范围。

This paper implements a real-time NURBS (Non-Uniform Rational B-Spline) path interpolator for a six-axis are welding robot.

给出了一种六轴弧焊机器人的实时NURBS路径插补方法。

This could be use to navigate the camera along the spline (curved line) to its intended concept.

这可能是用于导航，沿样条（弯线）至预定的概念相机。

In a closed cardinal spline , the curve continues through the last point in the array and connects with the first point in the array .

在闭合的基数样条曲线中，曲线连续通过系列中最后一个点，并与系列中的第一个点连接。

Specification of the spline cold rolling mill hydraulic system for the demonstration of the system and design note.

本说明书主要对花键冷滚轧机液压系统进行了系统的论证和设计说明。

Finally, the Subsection Cubic Spline interpolation was used to analyze the Pitch curves which provide a method for the further work.

最后运用三次样条插值对其节曲线了进行研究，这为后续的设计制作提供了一定的依据。

The yoke might be rigidly welded to the shaft tube or it might be a spline, or slip yoke.

轭可能强硬地被焊接到桥管，否则它可能是一个云形规、或滑轭。

The following illustration shows a set of points and a cardinal spline that passes through each point in the set.

下面的插图显示了一组点和经过这一组点中每一点的基数样条。

A given set of points could yield a variety of curves, depending on the properties of the physical spline.

一组给定的点可以产生各种各样的曲线，这取决于物理样条的属性。

The numbers are a text spline with an extrude modifier, and then an array over the clock's surface.

数字是用文字样条线配合挤压修改器做出来的，然后在钟表表面进行阵列。

and a supporting tube is sleeved outside the spline shaft position between the box body and the gearbox body of the bevel gear.

位于箱体和伞齿轮变速箱体之间的花键轴部位外套支撑管。