slewing

Where the peel is capable of slewing relative to the carriage, a further inaccuracy in the detection of the workpiece position arises.

凡果皮能回转相对运载，进一步报道失实，在检测工件的位置出现。

Slewing ring bearing( slewing bearing), is a bearing that able to bear axial load, radial load and overturning torque.

转盘轴承，又称回转支承，是一种能够同时承受较大的轴向载荷、径向载荷和倾覆力矩的大型轴承。

It may be used for slewing conveyers , welding arm and positioner, light, medium duty cranes, excavators and other engineering machines.

回转式输送机、焊机操作机、中小型起重机和挖掘机等工程机械均可选用。

Operations of the crane, including hoisting, Luffing, telescoping, slewing and hoisting of legs, are all driven by the hydraulic system.

起重机工作部分的动作，包括起升、变幅、伸缩、回转及支腿的升降，全部由液压驱动。

The rings of slewing bearings with a diameter of several metres are frequently cut into segments for ease of transport or installation.

五环的回转轴承直径几米切成段常为便于运输和安装。

All have a circular, motor-driven base whose slewing is unlimited by the length of the worm-gear shaft common on smaller cranes.

它们都拥有回转不受常见小型起重机的蜗杆齿轮轴长所限制的循环马达驱动基体。

The model is analyzed optimatically and the material used for the slewing platform is saved.

并对该模型进行了优化分析，达到了节约用材的目的。

The influence law of clearance on load distribution of single row four-point contact ball slewing bearings is researched.

研究了游隙对单排四点接触球转盘轴承载荷分布的影响规律。

The enterprises manufacturing iron, aluminum and copper provide material and technical foundation for slewing bearing production.

强大的钢铁、铝、铜等基础性原辅材料制造企业，为回转支承的生产提供原料和技术基础。

Slewing bearings can perform both oscillating (slewing) movements as well as rotating movements.

回转轴承能够执行往复振荡（回转）以及旋转的动作。

Slewing mechanism adopts winding motor or frequent motor, operating balance, efficient, fast and convenient in position.

回转机构采用绕线电机或变频电机，工作平稳，就位快捷、方便、高效。

Simultaneous operation of the three motions hoisting, luffing and slewing can be driven at full speed and SWL.

这三个运动同步操作、变幅、回转吊装可以驱动全速和协议。

Slewing left : push the handle to the right to revolve the crane to the left .

左转：把操纵手柄向右推，吊机就向左旋转。

The recovery time at this node following a slewing transient must be taken into consideration when choosing the bias current in M5.

跟随回摆瞬态的，此节点处的恢复时间，在选择M5中的偏置电流时必须考虑进去。

Slewing bearings can be designed as ball bearings or roller bearings.

轴承的设计可以作为辅助或滚柱轴承滚珠轴承。

Right click control the knuckle (telescope) angle, left click control the slewing and topping angle.

用鼠标点击控制关节（望远镜）的角度，左键控制回转和一流的角度。

A slewing jib crane is required to lift the collectors onto the MC, and to install the repaired collectors, back into the YC.

需要用一个旋臂吊机把收集器举到MC上，安装修好的收集器，放回到YC中。

The stacking method of single arm slewing stacker was introduced and the comparison was made for each stacking method in the paper.

介绍单悬臂旋转堆料机的堆料作业方式，对各种堆料方式进行比较。

Stop : set the handle to the mid - position to stop slewing .

停止：把操纵手柄挂回中位，回转便停止。

The EL5221 also features fast slewing and settling times, as well as a high output drive capability of 30mA (sink and source).

该EL5221还具有快速回转和稳定时间，以及高输出30mA的驱动能力（汇和源）。