roundness

The cross section shapes of the pits are same with that of the lock hole of the intramedullary nail, which are roundness or ellipse.

凹坑的横截面形状和髓内针锁孔的横截面形状相同，横截面形状是圆形或者是椭圆形。

He gave us the results in round numbers, but their roundness didn't affect the point he was making.

他给我们的是整数结果，但其取整不影响他提出的论点。

Numerical results showed that on this assumed condition, the smaller the tolerance of roundness is, the longer the fatigue life of hole.

数值模拟结果表明，在此假定条件下，孔的圆度公差越小，孔的疲劳寿命越大；

The straightening process is generally used to eliminate the longitudinal bending and the roundness error of the rolled seamless steel pipe.

为了消除无缝钢管轧制后的纵向弯曲及圆度误差，一般要采用矫直工艺。

NON-ROTATING STEM Non-rotating stem has close roundness and straightness tolerances and is burnished for a superior finish.

不旋转阀杆不旋转阀杆具有精密的圆度和平直度公差，并且经过抛光达到极高的抛光度。

Researches are made to find out the active tracing measurement strategy of crankshaft roundness error during non circular grinding process.

采用非圆磨削加工曲轴可在一次装夹完成主轴颈和连杆颈的磨削。

Her thighs, too, they used to look so quick and glimpsy in their female roundness, somehow they too were going flat, slack, meaningless.

她的大腿也是一样，从前富有女性的圆满的时候，是那样的灵活而光辉，现在却是平板、驰松而无意义了。

A new method of auto measuring the roundness error by means of the linear CCD (charge coupled device) is proposed.

提出一种应用线阵CCD自动测量圆度误差的新方法。

He still had just a hint of childish roundness left around his chin.

他的下巴依然留着一点婴儿肥的痕迹。

This method opens up the possibility for measuring sphericity using roundness measuring instrument.

该法为圆度仪测量球度开辟了一条新途径。

The radial run-out deviation is composed of the coaxiality deviation and parts of the roundness deviation.

径向跳动偏差的由同轴度偏差和零件的圆度偏差构成。

for measurements of rotational parts of coaxiality, roundness, symmetry, pulse volume.

用于回转类零件的同轴度、圆度、对称度、跳动量的测量。

This paper analyses roundness error by means of minimum zone law, and then a mathematics model is put forward.

在直线度、平面度公差判定的最小包容区域法中提出一个新的、快速的实施方法。

To support the principle of triangulation, etc. , the rolling process, the workpiece can improve roundness, concentricity, perpendicularity.

以等三角支撑原理，进行滚压加工，可提高工件真圆度、同心度、垂直度。

Determine out-of- roundness by comparing the difference between each measurement.

比较每个测量的不同，决定失圆。

The marbles shown here give a sense of smoothness, hardness, and roundness; the shells give a sense of texture.

这里展示的大理石雕刻品给了一种光滑、坚硬、圆形的感觉，而贝壳则给了一种纹理的感觉。

For higher depths of cut a decreasing tendency for the roundness can be observed although process forces increase.

随着切削深度的加大，圆度呈下降趋势，尽管切削力增加了；

The principle of the measuring roundness error system used the equal thickness interference and CCD image-processing system is expatiated.

阐述了利用等厚干涉，通过线阵CCD图像处理系统自动测量圆度误差的测量原理。

In Design and architecture, we are dealing with roundness and curves, with everything in reference to the body.

在设计与建筑中，我们要面对的是圆形与曲线，涉及到的一切都和身体有关。

Moreover, the business card printing and membership card-making Ink viscosity temperature variance is large, on the rollers of roundness.

另外在制卡和会员卡制作洋油墨黏度施温度感化改变较不小，差墨辊的圆整度请求较矮。