composites

The fibroin solutions, suspensions, and composites can be injected to fill cavities or to replace missing tissue.

丝心蛋白溶液，混悬液，和组合物可被*以填充空腔或代替缺少的组织。

Tensile strength and impact strength of the nano composites increased, while elongation at break decreased, compared with that of pure PPC.

相对于纯PPC材料，纳米复合材料的拉伸性能和抗冲击性能得到了显著提高，但复合材料的断裂伸长率降低。

the cathodes , which were made of above - mentioned three composites , and gel polymer electrolytes were used for lithium batteries.

并分别把以上三大类复合材料做成正极与液态电解质或凝胶态电解质组装成金属锂电池。

The wear resistance of the composites is greatly superior to that of the Cr-brass alloy in case of current carrier.

载流条件下，该复合材料的抗摩擦磨损性能显著优于铬青铜合金；

Combing with design mechanism and foundry technology, powerful wear-resistant parts of composites used for wearing condition have been made.

应用复合材料设计原理和铸造技术相结合，制备出用于磨损工况的强力抗磨局部复合材料。

The CTE value of composites after solution and ageing treatment decrease obviously compared with that of annealing treatment.

复合材料固溶时效后的热膨胀系数与退火态相比明显降低。

Healing in the composites is achieved through the addition of a microencapsulated healing agent and a catalyst to the matrix polymer.

在复合体系中的愈合作用是通过添加微包覆的愈合剂和一种催化基体聚合物的催化剂实现的。

The aircraft would be made from composites that smoothed the airflow; the design has no slots or flaps.

飞机将采用表面光滑的复合材料制造以减少同气流的摩擦，并且不再附有翼缝和襟翼等结构。

the surface modifiers for fly ash improved the mechanical, flow performances and heat-durability of the composites.

粉煤灰经表面处理以后，复合材料的力学性能、流动性和耐热性均有一定的改善和提高。

Background: Pultrusion is one of the fastest growing processes within the composites industry for making of composite parts.

拉挤成型工艺主要用来生产复合材料产品，是复合材料业中应用最广泛的一项工艺。

Plastic parts made of hardened PVC , PE or similar materials, and non- ferrous metal composites, are transferred to a separate utilisation .

硬化的PVC，PE或者类似的材料以及非铁金属复合材料中的塑料部分可以再利用。

In this paper, a new in situ technique has been used to fabricate discontinuously reinforced titanium matrix composites.

而本研究则采用原位合成工艺制备非连续增强的钛基复合材料。

These conditions have had a damping effect on composites manufacturing for residential new-construction and remodeling markets.

以上环境对用于住宅新建筑物建造及改建市场的复合材料制造具有阻碍作用。

Standard water skis were originally made of wood but now are usually constructed out of fiberglassbased composites.

标准的水上滑板起初是木制的，但是现在通常是由玻璃纤维合成物构制。

The effect of every factor of the composites powders was investigated and influence mechanism was studied.

通过研究获得了各组织成分结构因素对复合粉体电磁性能的影响规律以及影响机理。

In 2007 an explosion during the testing of its propellant killed three employees of Scaled Composites, the company building the spaceship.

2007年推进剂测试时发生爆炸，建造太空船的ScaledComposites公司三名雇员身亡。

These lighter, stronger composites are made of fibers of carbon or glass embedded in a second material, often plastic.

这些更轻、更牢固的复合材料由碳纤维或玻璃嵌入到其他材料（通常为塑料）制作而成。

Graphite crucible is a typical example of carbon composites and is one of absolutely necessary tools for modern coloured metallurgy.

石墨坩埚是碳复合耐火材料的典型实例，是现代有色冶金业不可缺少的工具之一。

Therefore, the study of its mechanical property is of great importance for the structural design and optimization of wood-bamboo composites.

因此，研究其力学性能对木竹复合层合板的结构设计和优化有重要的意义。

Composites showed higher conductivity and lower percolation threshold along the stretched direction than perpendicular to it.

与垂直于拉伸方向相比，复合材料沿拉伸方向具有更高的电导率及更低的渗流阈值。