soldered

This was at a time when other companies were selling PCs that had to be soldered together by the user.

而同时期的其他公司销售的个人电脑则需要用户自行组装。

He said Mr. Tang had never managed to fire his weapon, which in a police photo appeared to have been soldered together.

该发言人还说，唐未能使用其手枪开火。从警方公布的照片看，他的枪是焊接而成的。

The battery was not soldered to anything and was easy to replace.

l电池并无焊接，可以轻松更换

The new improved version is a Core Duo U7700 which had to be hand soldered on to the motherboard.

改良后的版本配有U7700双核处理器，并且手工焊接在母板上。

For a splice, start by removing a sufficient amount of insulation and sliding a piece of shrink wrap onto the wires to be soldered.

对于一个绞接处接头，从移开足够的绝缘材料开始，再滑移一件热收缩管装到需焊接的线束上。

A copper or brass fitting to which electrical wires can be soldered or otherwise connected .

铜或黄铜配件，电线可与之焊上或接上。

At the end of the black wire nearest the battery you will see that it is soldered to a couple of diodes.

黑线贴近电池的一端，可见被焊在一对二极管上。

But nine days later a single electrical splice overheated because it had been badly soldered, and disaster struck.

但9天之后一个简单的电气连接因为焊接不良过热造成伤害。

A process was advanced to eliminate the roughness of joints in the front of automobile body's top cover after being soldered.

探讨了解决车身顶盖前围焊接不平整问题的工艺过程。

The individual parts then are soldered together, and the jeweler may mount a diamond or other gem or may engrave a design into the metal.

每个配件被组合起来，并镶嵌上钻石或者其他珠宝，也可以在金属饰品上雕刻一些文字图案。

The extending portion is electrically connected by being reflow soldered to a land at a reverse surface of the substrate.

所述延伸部通过回流焊接与在基板背面的接合部电连接。

Careful inspection showed that the statue's head had been cast separately and soldered in place.

仔细检查发现雕像的头部是铸好后再焊接上去的。

The starts of each three groups are soldered together and the three ends are the phase wires that connect to the brushless controller.

该开始每三组是焊接在一起，三个完是三相供电，连接到无刷控制器。

The popular fin and tube type of radiator core has the advantage of fewer soldered joints and is there a stronger construction.

暖器炉核心的流行鳍和管类型有较少数的利益施以焊接了关节而且那里一个较强壮的建筑。

Do not clip probe to hot parts, e. g TO-220 metal plate, or components lead that are being soldered.

探头不要接触热的部位﹐例如﹐TO-220金属板﹐或正在焊锡中的零件脚。

Do not adjust the products position after soldered.

浸焊后请避免矫正位置。

The capsule element system consists of two capsule element halves soldered together.

膜盒系统包括两个焊接在一起的膜盒半元件。

to further reduce equivalent series resistance and improve long term reliability , the leads are then soldered with lead free silver solder.

为了进一步的减少等效串联阻抗和改善，长期的信赖度，引线是以无铅银焊锡来接焊。

The opposing su*ces of the beryllium oxide are metallized and soldered to the die and heat spreader, respectively.

氧化铍相对表面是金属化的，并分别焊接到管芯和散热器上。

Printed board assemblies - Part 4 : sectional specification - Requirements for terminal soldered assemblies.

印刷电路板组件.第4部分：分规范.端点焊接组件的要求